Description
Aftermarket Assassins RZR XP Turbo Clutch Breather
- Clutch cover breather fits 2016-2018 RZR XP Turbo Models (Not turbo S)
- Every XPT should have this breather kit!! Â We found that the factory clutch venting is not sufficient in properly cooling the belt. Â Additional venting is needed to prevent belt/clutch wear and failure. Â This is especially true when adding horsepower. Â The factory outlet is on the other side of the secondary, making it hard for air to escape on the plastic cover side. Â This 2.5″ vent tube helps reduce temps with or without our CVT blower.
- Drops belt temps 20-30 degrees on average
- Some cutting of factory plastics is necessary
- Installation is easy and the breather is dirt and watertight
- Fits under the factory clutch pre-filter for a factory look that functions
- You will need a 2-3/4″ hole saw for installation
- **The tube going to the clutch cover fits on the adapter loosely (3″ ID tube going to a 2.5″ OD tube). Â We have a half-inch gap to make up with the supplied worm clamp. Â If you are not okay with making up the gap with the clamp (seals and works perfectly fine) then do not purchase this product. ** We try to make things as perfect as possible, but sometimes working with suppliers and having low-volume items… you have to work with what you can. This is by far the nicest breather on the market, and this is the only “issue” with this product.
- See instructions HERE
- Part number: 108-1011