SuperATV Can-Am Maverick X3 High Clearance Front A-Arms
What’s worse than hitting a tough section of the trail and seeing the wheel that used to be attached to your UTV rolling ahead of you? Seeing the wheel that used to be attached to your UTV rolling ahead of you miles from home. You need SuperATV’s Can-Am Maverick X3 High-Clearance A-Arms. Our bend design gives you more ground clearance without having to install a lift kit. These control arms let you adjust camber as needed so you’ll always be ready for anything. We use bigger tubing than OEM as well, so you can see the strength.
Bigger and Stronger: Our Can-Am high-clearance A-arms use 1.25” tubing—that’s a full 25% larger than stock. And to keep them looking great, we use a UV-resistant powder coating. The tubed design will give your UTV an aggressive look.
We believe off-road enthusiasts deserve better than stock, which is why we’ve thrown in a lifetime warranty to sweeten the deal.
One Size Doesn’t Fit All: Our A-arms come pre-adjusted to match stock specs, allowing you to get on the trail sooner. If you do decide you want to make some adjustments, these Can-Am X3 front A-arms are good for that too. With adjustable pivot blocks, you can get your A-arms just how you want them. When you have your camber set properly, you can help get rid of premature tire wear.
Let SuperATV Do the Work—Preassembly Available: Want to spend more time on the trails and less time in the garage? Purchase a set of SuperATV ball joints with your A-arms and we’ll install them for you for free!
- Adds 1.5” of ground clearance
- 1.25” tubing is 25% larger than stock
- Adjustable upper pivot block for full camber adjustability
- Utilizes stock A-arm bushings
- UV-resistant powder coat finish
- Easy to install
- Backed by a lifetime warranty
- Can-Am Maverick X3 900 : 2018
- Can-Am Maverick X3 Turbo DS (standard) : 2017+
- Can-Am Maverick X3 Turbo R DS (XDS) : 2017+
- Can-Am Maverick X3 Turbo XRC : 2018+
- Can-Am Maverick X3 Turbo XMR : 2018+
- Can-Am Maverick X3 Turbo RR XDS : 2020+
- Can-Am Maverick X3 MAX Turbo DS (standard) : 2017+
- Can-Am Maverick X3 MAX Turbo R DS (XDS) : 2017+
- Can-Am Maverick X3 MAX Turbo RR XDS : 2020+
- Can-Am Maverick X3 Turbo R RS (XRS) : 2017+
- Can-Am Maverick X3 Turbo RR XRS : 2020+
- Can-Am Maverick X3 Turbo R XRC : 2018+
- Can-Am Maverick X3 Turbo RR XRC : 2020+
- Can-Am Maverick X3 Turbo R XMR : 2018+
- Can-Am Maverick X3 Turbo RR XMR : 2020+
- Can-Am Maverick X3 MAX Turbo R RS (XRS) : 2017+
- Can-Am Maverick X3 MAX Turbo RR XRS : 2020+
- Can-Am Maverick X3 MAX Turbo RR XMR : 2020+
- Not compatible with Smart-Shox
- You must re-use your stock ball joints if you don’t select a pre-installed ball joint at checkout.
- You will need to enlarge the hole on our A-arms to accommodate the 12mm bolt for 2019+ models