RPM Powersports Can-Am X3 (2020+) 120HP to 190+HP Big Core Intercooler Upgrade Kit 2020-2022+ Models only
If you’re doing an upgrade to your 120hp X3 to take it to the next level then this is what you need! Intercooler kit, charge tube kit with BOV, OEM BRP Fuel Pump, and OEM intercooler fan assembly! If you need a cat delete/down pipe, check out our exhaust section for all our options!
- Primary and Secondary Charge Tubes
- Washable BOV filter
- 30% More Volume
- Manifold Port for Vacuum/Boost Reference
- Silicone Reference port line ( 18″ )
- Simple Bolt On Replacement
- Additional Vacuum Port For Boost Reference or Boost Gauge
- Stainless Steel HD Clamps
- 25mm Billet Plug For Not Running a BOV & Boost Leak Testing
- OEM Fuel Pump Assemble BRP # 709001057
Although the 2020+ intercoolers are larger than previous models, we were able to make an impressive improvement over stock! From mild to wild, this intercooler has you covered! A huge improvement over stock with its massive oversized core allows you to stay in peak power for longer and safer! Cooler IAT’s and less heat soak equal more power even on 91 octane and less chance of knock or detonation. When tested in our deserty sand conditions we were able to maintain up to 40* cooler IAT’s!
A great option for the 120hp guys upgrading to 195+ HP tunes that require the need for an intercooler!
This intercooler utilizes the factory fan & shroud assembly. If you’re upgrading your 120hp non-intercooled model you will need to use the OEM (715900625) fan/shroud assembly from us THIS IS INCLUDED WITH THIS KIT. If upgrading your already intercooled unit, you will need the intercooler only (see our other listings).
- Gigantic 12″x11″x4″ Bar & Plate Core
- Drop-in replacement or upgrade, no modifications required.
- This intercooler does NOT utilize the factory top intercooler shroud.
- This intercooler is for 2020+ models only
- Fits ALL 2020+ X3 2 + 4 seat versions / models.
Depending on your route of tuning you may be able to utilize the factory Intercooler harness plug, otherwise, we offer a manual fan switch giving you control.
Add a Fan override switch here Can-Am X3 Fan override switch giving YOU full control of your Intercooler fan. The factory fan for the 120hp models will not turn on at all, the 154+hp models ONLY turn on under 80% load.