Description
Bikeman Performance Polaris RZR Pro R Stage 3 Bolt on Performer Kit
Features:
- .430 lift drop in cams
- Bikeman custom spec from Brian crower
- Instant throttle response
- Low end grunt and top end pull with the cams
- Choppy idle people Will turn heads over
- Our performance clutch springs hold much better belt tension then factory. Clutching adjusts to any terrain
- More responsive feel
- Cyclone clutch cover for even cooler belt temps and longer belt and clutch life
- Gains top speed and low end power
- These cams are specific to us and none Else can buy this same cam profile. Brand new cores not a regrind camshaft
- Must send in ECU for hard flash
Kit Includes:
- Slip on exhaust free flow exhaust
- Sniper weights with springs
- Cyclone clutch cover
- ECU hard flash
- Custom .430 lift cams
Notes:
These steps are different than the service manual. Do not follow service manual steps. Steps for starting your Pro R stage 3 and above for the first time.
- Roll the engine over by hand at least 10 revolutions clockwise when looking at it from the rear.
- Check Cam timing to make sure it is correct
- Make sure coolant and oil is at the correct level.
- Start the engine and hold above 2000rpm until it reaches 170 degrees F.
- Using the throttle drop rpm 50 rpm per 30 seconds until idle seems unstable.
- Stay at the unstable rpm until it becomes stable and then repeat step 5.
- Once the machine is idling at 1450 stable with no throttle input let sit and idle for 10-15 minutes.
- Your machine is now ready to ride.
- On higher duration cams it is common to need to give a little throttle to start the vehicle this is completely normal.