Description
Bikeman Performance Polaris RZR Pro R 350HP Stage 8 Bolt on Performer Kit
Features:
- 2150CC big bore
- Air extreme ported head
- All new stainless steel slip on exhaust
- Cyclone clutch cover (Cools belt up to 30 degrees)
- Custom .430 lift race cams
- +1 over sized intake valves and +4 over sized exhaust vavles
- Clutch Kit with snypr weights and springs
- Our performance clutch springs hold better belt tension then OEM
- More responsive feel with no power lag
- Gains top speeds and low end power
- Torque monster
- Must send in ECU for tuning
Fitment:
- Fits 2022+ pro R models
- Add up to 120 HP to your pro R
Notes:
- Pro R HP ratings-
- Stock 230-235hp@8400rpm
-
Stage 8, Level 8 ECU tune, Air Extreme Big Valve Head (1mm intake 4mm exhaust CNCP head)/BMP.460 lift cams, BMP muffler – 350hp8975rpm / 225TQ@7050rpm
Notes:
These steps are different than the service Manual. Do not follow service Manual steps. Steps for starting your pro r stage 3 and above for the first time.
- Roll the engine over by hand at least 10 revolutions clockwise when looking at it from the rear.
- Check cam timing to make sure it is correct
- Make sure coolant and oil is at the correct level.
- Start the engine and hold above 2000RPM until it reaches 170 degrees f.
- Using the throttle drop RPM 50 RPM per 30 seconds until idle seems unstable.
- Stay at the unstable RPM until it becomes stable and then repeat step 5.
- Once the machine is idling at 1450 stable with no throttle input let sit and idle for 10-15 minutes.
- Your machine is now ready to ride.
- On higher duration cams it is common to need to give a little throttle to start the vehicle this is completely normal