Aftermarket Assassins RZR Pro XP S3 Clutch Kit (2020 Models Only)

Description

Aftermarket Assassins RZR Pro XP S3 Clutch Kit

• Fits 2020 RZR Pro XP Models 2 & 4 Seat
• DOES NOT fit 2021 Models as the helix design changed
• Limit washer is highly recommended for 2020 models.  2021 models already have a thick enough washer from the factory.
• Our S3 recoil clutch kits pack a huge punch!  No matter the terrain, they hit hard and just keep pulling for days.  On the trail or at the race you’ll notice wicked acceleration and instant clutch response when getting back into the throttle after hammering that corner.  In the dunes you’ll see the same benefits, but also have much less bogging when climbing that big dune.  The machine will hold RPM so you can get where you need to go, and get there faster!  Going mudding?  Our mud setup will help turn those tires through the thick and deep with much better RPM and wheel speed that’s key to climbing out of that hole. We have a huge amount of CVT knowledge, a great passion for the sport, and have many hours into testing different setups in the real world.  We know you’ll be extremely pleased with the performance gain from our clutch kits!
• This kit is designed to give you a complete clutch package with shift components for both the primary and secondary clutches.  The primary weights & spring give you better shift characteristics in the primary, while the secondary spring and helix and built for the best acceleration gains possible while increasing belt grip.  This kit is a must-have when tuning your Pro XP to transfer that power to the wheels.
• Big acceleration gains and the pedal feels more “locked” to the rear wheels
• Kits work great with both stock or modified machines
• Works with tire or paddle sizes 28″ to 32″
• A must-have when running larger tires or paddles
• Wicked throttle response when on & off the throttle
• More efficient power transferred to the wheels
• More consistent clutch performance
• Cooler running belt temps, especially with larger tires or paddles
• Longer belt and clutch life
• Easily adjustable if needed
• Slightly higher engagement which is still very smooth
• Performance Helix 107-1043:    Aggressive helix with acceleration/higher horsepower/aggressive fast pace drivers in mind.  Works on Pro XP 2 seat 30-33″ Dirt Tires, 30-32″ dune paddles.  Works on Pro XP 4 seat with 30-32″ dirt tires, 28-30″ dune paddles.  
• High Load Helix 107-1042:    Slightly less aggressive than the 1043 helix with good acceleration gains/power transfer over the OEM helix.  Designed for a heavier vehicle, heavier tires, heavy sand load or crawling type riding in mind.  Works on Pro XP 2 seat 30-35″ Dirt Tires, 30-32″ dune paddles.  Works on Pro XP 4 seat with 30-33″ dirt tires, 28-32″ dune paddles.   Excellent all-around helix for any Pro XP!
• Our Recoil clutch weights are easily adjustable with simple magnets.  They have a custom AA profile, the BEST coating on the market (nitrocarburizing) which has increased wear resistance, improved fatigue strength, and added surface lubricity. These clutch weights also offer great performance and the ability to tune for many different applications or modification in the future, all without the need to buy extra parts.  The magnetic weights are the best option to properly place the mass where we need it on the weight for best performance for your application.
• An initial setup guideline is included which shows the best setups for dunes, mud, or all around trail riding. This also has brief instructions on installing your clutch kit, and other important information.
• View our installation video HERE 
• Kits include: AA magnetic adjustable clutch weights, AA primary spring, AA secondary spring(specific spring for just this S3 kit), & our AA custom cut helix
• All models should purchase and install our Primary Clutch Limiter
• The only special tool needed is our Compression Tool #1